1.The machine is controlled by PLC with independent electrical box. 2. There is a centralized operation control panel, which is covered
with operation buttons and selection switches. 3. The control system has two kinds of operation modes: manual and
automatic. A. Manual: Point-action type, press the corresponding button to
complete the corresponding action, release that is, stop, this
function is used to adjust the mold. B. Automatic: Rotate the switch from automatic press the "fabric"
button, that can complete the following process route, fabric
cylinder fabric - fabric cylinder return - slider fast down
--Slowly pressurize the slider--Achieve the set pressure--Return of
the slider--Top out of the lower cylinder. -- Fabric cylinder
fabric (at the same time the finished product is pushed out) --
Fabric cylinder return ....... 4. Safety settings: A. Emergency stop function: when the machine is abnormal, press the
emergency stop button press work all stop. B. overload protection, the hydraulic system is equipped with a
hydraulic safety valve to ensure that the press will not work
overload. 5. The supplier is responsible for installation and commissioning,
but the buyer need to pay for the round trip tickets and arrange
the accommodation and transportation in your country. 6. The supplier's products since the date of sale of the
implementation of the "warranty service", the quality assurance
period of one year, in the warranty period, non-user reasons for
the damage caused by the parts, free of charge replacement (wearing
parts are not under warranty). When the warranty period expires, a
lifetime warranty will be implemented, and the labor cost will be
charged. | 
